Equipment & Services

OilOnline's Equipment & Services is an online catalog listing equipment for sale and services for hire. Click on the appropriate section below to view:

Equipment for Sale: New Used

Services for Hire: Wellsite Professional Auxillary

New Remote Capability for Marine Equipment Health Monitoring
MACSEA Ltd has announced a remote capability to its automated equipment health monitoring software. Diagnostic equipment data can now be viewed from anywhere in the world, in real time, using MACSEA's innovative technologies.

The new remote health management capability can be used for tele-maintenance of shipboard equipment by shore-side technicians in support of reduced manning initiatives by the Navy and commercial ship operators. Accessible around the world over the Internet or on a local intranet, MACSEA's DEXTERTM software collects information gathered from equipment, performs diagnostics, and delivers this information to wherever it is needed, and in real-time.

The new functionality allows experts to have a virtual presence on any ship, anywhere and anytime, providing technical assistance and rapid resolution of problems onboard. It can assist in maintenance logistics, allowing port engineers and operations staff to monitor equipment performance to identify key maintenance activities and plan remedial activities accordingly.

For more information, please contact: Martin French at mfrench@macsea.com or visit www.MACSEA.com

MultiTherm IG-1® new economical heat transfer fluid
MultiTherm IG-1 has been designed to offer an economical alternative and highly refined hydrotreated mineral oil that includes temperature ranges from 10 F (-12 C) to 550 F (288 C). Properties include a high flash point of 442 F, very low vapor pressure, non toxic and non hazardous. Heat transfer fluids are used in a multitude of processing systems including the Refining Industry. MultiTherm IG-1 is designed for use in systems equipped with expansion tanks, and it is recommended to have pressure relief valves an inert gas blanket on the system. Not only does IG-1 resist thermal breakdown in closed-loop systems, but it has a long service life as well. Organic heat transfer fluids degrade over time due to thermal cracking, oxidation and contamination. To help prevent this the first important step is choosing the right type of Heat Transfer Fluid for use at your plant. Specify IG-1 today!

For more information, please contact: Matt Jacobs at mjacobs@multitherm.com

CEP introduces the arrival of JEP-14
Say good-bye to those tough oil and grease covered surfaces with Jep-14 - a non-toxic, biodegradable industrial cleaner and degreaser, suitable for any type of oil or grease application.

Jep-14 is a unique water-based formula that encapsulates and emulsifies petroleum based products, forming a special base surfactant that can be recovered. This unique blend of ingredients is formulated to work in tough hydrocarbon spills and can be used on floors, walls, machinery, sumps, hoods and other hard surfaces. In addition to these applications, Jep-14 is also recommended for restaurants, food processing, oil platforms and pipeline cleaning.

This highly-effective formula is odorless, non-flammable, non-carcinogenic and contains no butyl or harsh solvents.

For more information, please visit: www.cepsorbents.com

Seeking Oil & Gas Company or Properties
Public company with funding seeks OIL & GAS company (or properties) to acquire for newly formed subsidiary that will be brought public. This public, energy subsidiary will continue to acquire properties for cash and trading stock and list on a major US Stock Exchange.

For more information, please contact: Arthur Daniels, Daniels Corporate Advisory Company, Inc., Ph: 212-859-3466 or email: Onewallstreetn@aol.com

Pipe and Tube Bending by Tulsa Tube Bending

Safety and Environmental Vapor Control Products

Looking for Floating Cranes

We are looking for Floating Cranes:

1500 - 3500 tons

400 - 800 tons
Please advise of any that you may have for sale.
Tom Williams, Rodson Universal, Inc.,
Tel: +38 044 227 7772, E-mail: sales@rodson.com

Everlast ANSI Safety Signs

Tech Products Inc announces its new, patented, Everlast, ANSI Safety Signs (10" x 14" or 7" x 10") for outdoor or harsh environments. 1/4" thick, these high impact, polyolefin plastic signs are more durable than any other sign in the world. UL tested for 20 years and still going without change. They are the only sign system to undergo UL testing. They use the highest quality UV stabilizers, antioxidants and permanent color pigments. For lifetime legibility, all words and logos on all signs are "molded in" not simply painted or screened on. Abrasion proof, lifetime legibility gives you lower costs and reduced liability exposure.

If you specify or purchase signs, tags or markers for your organization or company, please call 1-800-221-1311 for a Free Sample, or, please write: Tech Products Inc, 105 Willow Avenue, Staten Island, NY 10305, or Email team@techproducts.com

Actuators and Valves

REXA combines hydraulic, electronic and mechanical technologies to achieve state-of-the-art actuator design. The heart of our Electraulic™ Actuation is the patented Flow Match System. This technically-advanced hydraulic circuit controls internal pressure independent of the magnitude and direction of the applied load. The result is smooth motion, exact positioning and instantaneous response.

Available in Linear, Rotary and Drive configurations, our two models, Xpac and Mpac, can fulfill virtually any positioning application. Product versatility, custom mounting and digital calibration eliminate the nightmare of retrofit installations.

Our range of actuators and drives is the widest available. The standard model number best illustrates this capability. Rated output, stroke or rotation, power modules and failure mode upon loss of electric power are described in this simple system. The charts represent our standard sizes. Larger thrusts, torques and strokes are available.

For more information, please contact: Mike Brennan, Dir Engrg & Mktg, REXA/Koso America, Ph: 508-584-1199, Fax: 508-584-2525 or visit www.rexa.com

Proposed offer for sale of crude oil

We are independent Crude Oil marketers in Nigeria, specializing in sourcing of interested buyers of Bonny Light Crude Oil (Nigerian Gold) from any part of the world.
If interested, please contact us through e-mail: emeojukwu@fastermail.com

Mining and Oilfield Equipment from Russia

North Dream Inc. supplying the drilling industry with quality tri-cone drill bits (milled tooth, tungsten carbide inserts) from API and ISO certified Russian manufacturer. Sizes from 4 3/4 to 17 1/2. Also single-cone bits, percussion bits, hole openers, stabilizers, expanders, single and multi cone under reamers, single cone expanders, air operated spiders and slips. Custom build equipment (TCI and milled tooth bits, etc).
Please contact: Kirill Maiorov, Sales & Mktg Dir, North Dream Inc., E-mail: northdream@rogers.com

Power Drillpipe Tong

Power Drillpipe tong; sales, rentals and operator services. Three models:

7.250 - 4 1/4"thru7 1/4" OD range 0-60,000 ft lbs torque,

8.5 - 4 1/2" thru 8 1/2" OD range 0-100,000 ft lbs torque,

10 - 6" thru 10" OD range 0-150,000 ft lbs torque. Speciality snubbing tongs designed to be mounted on the jack/slips. Repair services of air & hydraulic pipe spinners of all brand names.
Please contact: Tommy Deville, Rogers Oil Tool Services, Inc., E-mail: tommyd@rogersoiltools.com

Oilfield Photography

We Want To Do Your Oilfield Photography!
We have been photographing both offshore and land based oil rigs, pipelines, compressor stations, etc. for 30 plus years. Shooting from helicopters, crew boats and on rig floors. We have photographed everything from rig hands to CEO's. Let us shoot for you!
For more information, contact: Carl Maples, Carl Maples Photography, 1305 Nicholson St, Houston, Texas 77008,
Ph: 713-868-1289 or 877-225-7160 or visit carlmaples.com

Centrifugal Pumps needed

We have real interest for following centrifugal pump. Pumped medium Crude Oil, Temperature of medium -2C-+35C, Ambient temperature - 30C-+40C, Capacity 2700m3/hr, Head - 117mm, NPSHr - 4m or less, Viscocity - 50cst,20C; Density - 860kg/m3; Motors ABB(Eexd)50Hz
Please contact: Andrey Tomishev, Manager, Rino TK, E-mail: rino@neonet.lv

Sale of 2 Offshore Vessels ...

We can offer for sale ´WB97´ Construction/hook up Maintenance barge accommodation for upto 300 persons 102 M.length 22 M.breadth Class ABS upto 2005 Full detail and photos can be viewed on Owners website http://barges.com Asking price reduced to USD 6.50 mill try offer USD 5.5 Mill prompt cash payment.

Also may consider sale of ´CABLE 1´ Construction/hook up Maintenance barge accommodation for upto 100 persons (cvan be increased) 91.44 M.length 27.44 M.breadth Class BV upto 2006 Full detail and photos can be viewed on Owners website http://barges.com Asking price reduced to USD 5.50 mill try offer USD 4.5 Mill prompt cash payment.
Please contact: Andrew Vogel, Nordic Offshore,
Tel: (44)-7767-837080

The Rigzone Market is a leading online equipment marketplace where buyers and sellers come together. With Rigzone's leading web presence and its team of brokers working to sell equipment, Rigzone is the perfect place to offer your equipment for sale. And if you are in the market for equipment, check out the extensive listings on Rigzone's web site.

Construction Services ...

We Offer Design, Building, Renovation, and Consulting for Crane Building, Warehouses, Offices, and Special Puproses. Serving the Texas Gulf Coast for Over 26 Years.
Please contact D. L. Carroll, President at P.O. Box 1713, Bay City, TX 77414-1713, Ph: 979-245-9168, 1-866-604-6573 or E-mail: dleecarroll@aol.com

High Performance Fabrication

Titanium/Zironium High Performance Pipe

Design & Fabrication of Titanium & Zirconium Heat Exchangers, Pressure Vessels, Towers, and Pipes.
For more information, please contact us at 604-941-8211, click on our logo, or visit our website at http://www.ellett.bc.ca